First, save [ DiskDeleter Program Zip file for preparation ] somewhere in a PC, and extract the program. You will find [ DDUXCreator.exe ] or [ DDTXCreator.exe ]. Run the .exe program and install the program in a USB memory following the manual for preparation.
When the program is installed in a USB, open the folder you have saved the Zip file. You will find automatically generated [ DDUX.ISO ] or [ DDTX.ISO ].
Insert a blank CD into the CD drive. Right click the [ DDUX or DDTX .ISO file ] and select [ burn disk image ]. Windows disk image burning tool automatically starts. Run [ burn to disk ]. When burning has completed, [ Bootable CD Media ] is created.
Insert DIskDeleter USB and the [ Bootable CD Media ] into the PC you wish to wipe and run the CD. (You need to inset DiskDeleter USB when you CD boot the PC.)
If a message [ DiskDeleter USB cannot be found. Please insert a right USB. ] shows up, please insert the USB in another USB port, and boot the PC again.
If USB is recognized and DiskDeleter program has started, and yet a message [ USB cannot be found ] shows up, it could be an issue of USB Driver in the PC. Please apply USB Port Driver of Widows10 64bit version.
DiskDeleter starts by loading Windows PE into System Memory, in which process PC's BIOS and USB communicate. After the program has started but before the main UI shows up, this communication ends and Windows and USB take over. At this point, if PC is using its manufacturer's original USB driver instead of a generic driver, Windows PE may not be able to recognize the PC's USB port. This results in an error.
When DiskDeleter has loaded into a device, a message [ You can pull out DiskDeleter USB ] comes up. When you see this message, you can pull out the USB from the device.
[ Parallel wipe operations ]
When you have pulled out DiskDeleter USB from a device, an option to [ auto save deletion log on HDD boot area ] becomes disabled.
If you need to save the deletion log, please follow this procedure.
Deletion complete → Insert DiskDeleter USB in the PC → click [ Save ] on the deletion log window
When Diskdeleter generates a deletion report, 2 encrypted files are automatically created: [ xxxxx_AT.html ] and [ xxxxx_HASH.txt ]. Combination of these two files opens DiskDeleter Tamperproof Deletion Certificate. If one of these is changed / modified in any way, the certificate will not open.
Open with Microsoft Edge:
Open [ _AT.html ] and click [ Show Deletion Certificate ].
If the HASH matches, the deletion certificate will open.
(These two files need to be located in the same folder level.)
Open with a Web browser such as Chrome, Firefox, etc.
Open [ _AT.html ] and click [ Show Deletion Certificate ]. You will be asked to input [ HASH ] value.
Open [ _HASH.txt ] file using a text application such as Notepad, copy the entire string, paste it in the input space in the browser and click [ OK ]. If the HASH matches, the deletion certificate will open.
If you have configured to save deletion log in the bootable section of a HDD, the log will be recorded in the beginning of the HDD. This is a correct result.
If you do not need to save a log on the HDD, please uncheck a box [Save log report in the boot section] in the Option window, and try again.
Coming Soon...
© 2024 Jungle KK - Powered By Knowledge Fortune